How to Make Easy and Pretty Kitchen Gloves (Pot Holder) | Sewing Pattern

Is it time to replace your kitchen gloves?

Pictures and Description

It's time to change the kitchen mitts, so I made a new one.

Easy to make and pretty.

It is good to use when moving a hot pot or taking dishes out of the microwave.

If you want to use it for the oven, you need to add more interfacing.

I put a quilted batting between the outer fabric and lining.

It's easier to make if you make it with a quilted fabric with a pretty pattern.

It's pretty just hanging up, so it's also good for decoration.

Outer : Cotton oxford, Lining : Cotton

Interfacing : Pre-quilted batting / White quilting fabric polyester cotton

(It is quilted together with polyester cotton and white t/c fabric.)

The pattern is on my YouTube channel.

1. Fold the piece of fabric for the loop in 4 layers and sew.

2. Lay the interfacing and outer together. Fix the loop to the wrist.

3. Place the right side together and sew it, leaving an allowance for the bottom seam.

4. Clipping and cut the seam allowance, leaving about 0.5 cm (3/16 in) shorter.

5. Place the right side together and sew about 2mm (⅛in) inward from the stitching line, leaving and opening.

6. Clipping.

7. Turn the lining inside out and put it inside the outer.

8. Sew the entrance of mitten.

9. Cut only the seam allowance of the interfacing and clip the curves.

10. Turn it over through the opening and make the shape.

11. Fold the opening seam allowance inward and sew.

12. Put the lining inside the outer.

13. Make another one in the same way.

00:10 Pattern 00:15 Materials 00:21 Loop 00:39 Outer 02:15 Lining 02:59 Sewing the outer and lining together 04:53 Sewing the opening